PPPoE Configuration of Netgear DG 632 Modem/Router.

Go to Local Area Connection Properties and set the TCP I/P settings and set to Obtain IP Address automatically and then go to command prompt and do an ipconfig. You should see an IP address allotted..

Also ensure that the browser is not configured with proxy settings. Else you may not be able to open the web interface at all.

Now Open your favourite browser and type 192.168.0.1 in the URL. Press ENTER to view the login page..

The default user name is admin and the password is also admin. Click OK to go the web interface as shown below:-

The configuration of the Modem/Router in the bridge mode is now over. You now have to create a connection on the desktop...

Creating a PPPoE Connection on the desktop(Dailing From the Computer)

The procedure for creation of PPPoE connection for the broadband connection is bit different for different operating systems and the different router models.

Windows 98, Windows me, Windows 2000 Operating Systems

A patch known as PPPoE is to be installed for these systems to enable the broadband connectivity. Installing the patch will create a connection on the desktop automatically. However, these modems have only one LAN port and hence an ethernet card in the computer is necessary..The patch can be downloaded from here.

Windows XP and Windows 2003 Operating Systems

However, the connection can be created in Windows XP and Windows 2003 without installing the said patch. The procedure for doing so is available here.

 

Design downloaded from Free Templates - your source for free web templates